Estineer

Case studies

Worked examples, priced on video.

Each case study follows one item through an Estineer tool, from the datasheet to the price, man-hours and drawings. Press play to watch it on YouTube.

Change a pipe spool turn and see it in 3D · 1:23 · English subtitles · plays from YouTube when you press play. Watch on YouTube

Case study · 1:23

Change a pipe spool turn and see it in 3D

Spool SP-204 for caustic dosing: 4 inch 316L, schedule 10S, class 150 flanges. Each part is a card in fabrication order; turning an elbow redraws the sketch and the 3D model and updates lengths, welds and price at once. Then a concentric reducer steps the line down to 2½ inch, and RT on five welds adds the NDT cost.

Spool
SP-204, NPS 4, 316L Sch 10S
As first built
AUD 7,980 direct, 61.1 MH
With reducer
AUD 8,600 direct, 67.2 MH
With RT on 5 welds
AUD 9,370 direct, 72.0 MH
Indicative price
AUD 11,860
Report
A$99, first one 80% off

Figures as shown in the video: indicative, with the tool's default rates. Your own labour rate, contingency and markup change them.

Sulphuric acid tank to API 650, priced in minutes · 1:15 · English subtitles · plays from YouTube when you press play. Watch on YouTube

Case study · 1:15

Sulphuric acid tank to API 650, priced in minutes

A 20 m³ carbon steel tank for 93 to 98 % sulphuric acid: cone roof, flat bottom on a slab, 3 mm corrosion allowance, blast and paint, eight nozzles with a desiccant breather on the vent. The tool gives the price, man-hours and duration, the drawings and the API 650 calculations.

Service
Sulphuric acid 93 to 98 %
Size
20 m³, carbon steel
Design basis
API 650 (selected methods)
Direct cost
AUD 33,100
Indicative price
AUD 41,900
Man-hours
193 MH, about 6 weeks

Figures as shown in the video: indicative, with the tool's default rates. Your own labour rate, contingency and markup change them.

More case studies are on the way. They are also on the Estineer YouTube channel.