Preview. The whole line in 3D, the spool list and, for the spool shown, its tables, drawing sheet 1 and the report cover. The purchased package covers every spool of the line: package PDF (line summary, then the report and drawings of each spool), all drawings, Excel, Word and the material take-off, with its own report number and check code.
List the whole line from the start face to the finish face; Break cards split it into spools. Pipe length is centre line: from the start face, an elbow centre or a branch centre to the next one. Turns are relative to the pipe before them. Fittings are ASME B16.9 butt weld; NPS 1-1/2 and smaller are ASME B16.11 socket weld Class 3000. Olets are MSS SP-97, swage nipples MSS SP-95 (size changes at NPS 1-1/2 and smaller always use one). A pipe nipple can replace the branch pipe in a branch card.
At every Break card you place, at every valve (a Valve card puts a flange on each side), and automatically wherever a spool would not fit the truck envelope of 12 × 2.4 × 2.6 m. Each break can be a field weld with bevelled ends or a weld-neck flange pair.
Yes. Every spool is estimated as its own shop order, with its own report, isometric, weld record and cut list. The line summary adds the field joints, the valves between spools, the site bolting materials and the line's project management and QA/QC.
A$99 for the first spool and A$49 for each further spool, at most A$1,490 for a line of up to 30 spools, GST included. The first report is 80% off. The preview, with the whole line in 3D and the spool list, is free and needs no sign-up.
A few minutes for a short line, up to about 20 minutes for 30 spools. We email you when the files are ready, and they are kept on your account for 12 months.
Yes, once, within 24 hours, as Rev B. If the revision adds spools, only the list-price difference is paid; the same or fewer spools is free.